反應型熱熔膠
| 品名 Articles | 外觀 Appearance | 黏度 Viscosity(cps) | 操作溫度 Application Temperature(℃) | 特性 Characteristics |
| RM-6806 | 微黃固體 Off white solid | 3,000-6,000 @90℃ | 90~95 | 高透濕型產品；用於貼合防水透濕膜與織物，對於4-5級撥水處理織物，仍有良好接著力，耐溫水水洗。 Breathable product；Laminated fabric with membrane Good bonding even laminated with water repellent treatment fabric, Good washing resistance. |
| RM-6855 | 微黃固體 | 4,000-8,000 @90℃ | 90~95 | 中高透濕型產品；用於貼合防水透濕膜與織物，對於4-5級撥水處理織物，仍有良好接著力，耐溫水水洗。 Breathable product；Laminated fabric with membrane Good bonding even laminated with water repellent treatment fabric, Good washing resistance. |
| RM-6858H | 微黃固體 Off white solid | 3,000-6,000 @90℃ | 90~95 | 中低透濕型產品；用於貼合防水透濕膜與織物，對於4-5級撥水處理織物有良好接著力，耐溫水水洗。高耐水壓。 Breathable product；Laminated fabric with membrane Good bonding even laminated with water repellent treatment fabric, Good washing resistance。High water proof. |
| RM-6801 | 微黃固體 Off white solid | 4,000-8,000 @90℃ | 90~95 | 中低透濕型產品；用於貼合防水透濕膜與織物，對於4-5級撥水處理織物，仍有良好接著力，耐溫水水洗。 Breathable product；Laminated fabric with membrane Good bonding even laminated with water repellent treatment fabric, Good washing resistance. |
| 品名 Articles | 外觀 Appearance | 黏度 Viscosity(cps) | 操作溫度 Application Temperature(℃) | 特性 Characteristics |
| RM-6863 | 透明微黃 Light yellow Transparent | 8,000~12,000 @100℃ | 95~100 | 用於貼合織物與織物或織物與皮革；對於4~5級撥水處理織物，有良好接著力，耐溫水水洗。 Laminated fabric with fabric or fabric with leather; Good bonding even laminated with water repellent treatment fabric. Good washing resistance. |
| RM-6860 | 透明微黃 Light yellow Transparent | 15,000-20,000 @100℃ | 95~100 | 用於貼合織物與織物或織物與皮革；對於4-5級撥水處理織物，有良好接著；可耐溫水水洗。 Laminated fabric with fabric or fabric with leather； Good bonding even laminated with water repellent treatment fabric, Good washing resistance. |
| 品名 Articles | 外觀 Appearance | 黏度 Viscosity(cps) | 操作溫度 Application Temperature(℃) | 特性 Characteristics |
| RM-6710 | 透明微黃 Light yellow Transparent | 400~800 @100℃ | 80~85 | 可用於紙與PE膜的貼合，具有低熔融粘度，因此易於使用，也可降低能耗。 It can be used for the lamination of paper with PE film.it has low melting viscosity, so it is easily to be used and also can be cost down the energy. |
| 品名 Articles | 用途 Application | 黏度 Viscosity(mPa·s) | 操作溫度 Application Temperature(℃) | 開放時間 Open time (23℃) | 特性 Characteristics |
| RM-6904Z | PET, 聚烯烴等膜材/板材貼合 Various decorative sheet [ PET, Olefin, LVT etc.] × Board substrate | 9,000 @120℃ | 100~120 | ~2min | 開放時間適中，適用於高光澤膜/板材貼合。 This adhesive has moderate open time, and it is available for reflective decorative sheet. |
| RM-6905 | Thin film [ Olefin etc. ] × Various board | 10,000 @120℃ | 100～120 | 2.5min | 良好的耐水解性 * 建議在低溫環境下使用。 Good hydrolysis resistance * Recommended for use in low temperature environments. |
| RM-6905NF | Board [Plywood] × Board [ MDF ] | 12,000 @120℃ | 110～130 | 2min | 開放時間和初始強度適中 Moderate open time and initial strength |
| RM-6917 | Melamine decorative board etc. [Warped hard board etc.] × Wood board | 18,000 @120℃ | 110～130 | 4min | 高初期強度 High initial bond strength |
| AICA AIBON 25009-F | 美耐皿裝飾板/木板貼合 Melamine decorative board etc. [Warped hard board etc.] × Wood board | 6,500 @163℃ | 110~130 | ~4min | 較強的初期強度及較長的開放時間，適用於易翹曲之美耐皿版/木板貼合。 This adhesive has high green strength, so it is available for warped board like a melamine decorative board. |
| AICA AIBON 2601 | 聚烯烴,PVC等膜材/木質基材包覆貼合 Thin decorative sheet [ Olefin,PVC etc. ] × Wrapping wood or plastic | 20,000 @140℃ | 120~140 | ~15sec | 較強的初期強度及較短的開放時間，適用於包覆貼合。 This adhesive has high green strength with a short open time. It is can use on wrapping apparitions. |
| AICA AIBON W-2510S | 薄質紙材(如Olefin等) × 木質板材 | 9,000 ＠120℃ | 100~120 | ~5sec | 有非常好的耐水解，適用於強調持久性的需求。有非常好的耐水解，適用於強調持久性的需求。 |
| AICA AIBON W-2702 | 硬質基材(如美耐皿裝飾板等) × 木質板材 | 16000 @120℃ | 110~130 | ~3min | 開放時間適中，初期強度高，適用於適用於易翹曲之美耐皿版貼合。 |